EV-97 EuroStar

August 7, 2023

Unification of the strength class of the fastening bolts in the joint of the engine and the engine mount hinges and the resulting minimization of the possibility that these bolts will be accidentally interchanged.

August 7, 2023

June 9, 2023

Increasing the safety of the oil system of THE ROTAX 912 ULS2 / S2 series engines by installing the PYROJACKET PJA 14 protective sleeves on the oil system hoses.

June 9, 2023

June 2, 2023

Unification of the strength class of the fastening bolts in the joint of the engine and the engine mount hinges and the resulting minimization of the possibility that these bolts will be accidentally interchanged.

June 2, 2023

August 13, 2021

Due to a deviation in the manufacturing process some tailpipe of muffler may have anomalies in the welded joint. In some cases, there is possibility that cracks may occur on a limited number of muffler tailpipe. Undetected cracks during pre-flight check may result in a loss of tailpipe.

July 1, 2021

Based on an agreement between the French Microlight Association (FFPLUM) and the French Civil Aviation Authority (DGAC), a 2019 New French Microlight Regulation has been issued, where two-seater multiaxis with an MTOM of 500 / 525 kg (without / with parachute system) are considered as a microlight aircraft.

November 2, 2018

Based on the experience of operation, the airplane manufacturer specified the Canopy Opening in Flight Emergency Procedure.

January 31, 2018

Inspection of the Magnum emergency system due to the repeated non-compliance with service instructions of the emergency system manufacturer on aircraft in the operation.

November 30, 2017

Due to repeated non-compliance with service instructions of the emergency system manufacturer and in order to increase the emergency system safety the airplane manufacturer points out on the compliance with service instructions of the emergency system manufacturer.

October 20, 2017

The installation of mechanical catch against the opening of the canopy.

July 26, 2016

The manufacturer of ROTAX engines orders exchange of carburetors floats on engines.

November 23, 2015

The installation of mechanical catch against the opening of the canopy.

June 8, 2015

Defective production lot of Semperit FUB 386 DN6 fuel hoses. Replacement of the fuel hoses as defined in the bulletin.

May 18, 2015

The manufacturer of Rotax 914 F a Rotax 914 UL engines informs about a possibility of clutch slipping during the engine operation, which can lead to an undesirable increase of engine speed above the set limit.

December 1, 2011

December 1, 2011

Rotax alert service bulletin-possible occurence of crack formation on crankshaft.